The RAM fork stem mount is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore hole of fork stems and will work with stems that measure from 12-20 and 28mm or 0.5" - 1.10" at the following intervals: Metric Standard 12mm 0.5" 14mm 0.55" 16mm 0.63" 18mm 0.71" 20mm 0.79" 28mm 1.10" Please note: It is NOT possible to use this part on bore holes of 21mm to 27mm Material: Powder Coated Marine Grade Aluminium Ball Size: 1" Rubber Ball "B" Size TIP: If you have a sports bike and want a mount to fit into the centre yoke stem bore hole on your handlebars the yoke stem mount kit on this page is fine. The mount is configured using parts determined by the diameter size of the inner bore cylinder. Check the size of the bore against the gripper washers in the kit. These are 12mm, 14mm, 16mm, 18mm, 20mm and 28mm. This kit does not suit all bikes, for example, Honda Fireblade, Blackbird or any sports bike where a steering damper is attached. Specialist versions of RAM adapted ball parts can be found at www.telferizer.com
Bikes that this will NOT fit include, Honda Fireblade CBR 1000RR, Blackbird CBR 1100XX, VTR 1000 SP2, VFR1200. Kawasaki ZZR 1100, ZZR1200, ZZR 1400. Aprilia Bikes, Ducati ST series, BMW S1000RR and any bike where a steering damper is fitted.
View Basket
Motorcycle Fork Stem Mount with 1" Ball